Shenzhen Zhongguanda Technology Co., Ltd.
Customer first, unity and mutual assistance, learning and innovation, open sharing
Add to Cart
High Frequency 230VAC 6KVA Rack Mountable UPS With Snmp Card
Rack Mount UPS High Frequency Online 6KVA 220V Pure Sine Wave Rack Mount Battery Backup Power
Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208 VAC.
When using batteries from 16-19, the unit will de-rate according to the formula: P=Prating x N/20
If the UPS is installed or used in a place where the altitude is above than 1000m,
the output must be derated one percent per 100m.
Product specifications are subject to change without further notice.
| Model | ZGD 6K (L) RT | ||||
| PHASE | 1 phase in/ 1 phase out | ||||
| CAPACITY | 6000 VA/6000 W | ||||
| INPUT | |||||
| Nominal Voltage | 208/220/230/240 VAC | ||||
| Voltage Range | 110-300 VAC @ 0~60% load; 140-300 VAC @ 60~80 % load; 176-300 VAC @ 80~100 % load | ||||
| Frequency Range | 46 ~54 Hz or 56~64 Hz | ||||
| Phase | |||||
| Power Factor | ≧ 0.99 @ 100% Load | ||||
| THDi | ≦ 4% @100% load; <6% @ 50% load | ||||
| OUTPUT | |||||
| Output Voltage | 208*/220/230/240 VAC | ||||
| AC Voltage Regulation (Batt. Mode) | ± 1% | ||||
| Frequency Range (Synchronized Range) | 46~54 Hz @ 50 Hz or 56~64 Hz @ 60 Hz | ||||
| Frequency Range (Batt. Mode) | 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz | ||||
| Current Crest Ratio | 3:1 (max.) | ||||
| Harmonic Distortion | ≦1.5% THD (Linear Load), ≦ 7 % THD (Non-linear Load) | ||||
| Transfer Time | AC Mode to Batt. Mode | zero | |||
| Inverter to Bypass | zero | ||||
| Waveform (Batt. Mode) | Pure Sinewave | ||||
| Overload | AC Mode | 100%~110%: 10 min; 110%~130%: 1 min; >130%: 1 sec | |||
| Battery Mode | 100%~110%: 30 sec; 110%~130%: 10 sec; >130%: 1 sec | ||||
| BATTERY | |||||
| Standard Model | Battery Type | 12V/7 Ah | |||
| Numbers | 16 | ||||
| Typical Recharge Time | 9 hours recover to 90% capacity | ||||
| Charging Current (Max.) | 1.0A | ||||
| Charging Voltage | 218.4 VDC ±1% | ||||
| Long-run Model | Battery Type | Depending on applications | |||
| Numbers | 16-20** | ||||
| Charging Current (Max.) | 4.0A | ||||
| Charging Voltage | (13.65 VDC x battery number) ± 1% | ||||
| INDICATORS | |||||
| LCD Panel | UPS status, load level, battery level, input/output voltage, discharge timer, and fault conditions | ||||
| PHYSICAL | |||||
| Standard Model | Dimension, DxWxH (mm) | UPS Unit: 600x438x88 [2U]; Battery Pack: 695x438x88[2U] | |||
| Net Weight (kgs) | UPS Unit: 15; Battery Pack: 48 | ||||
| Long-run Model | Dimension, DxWxH (mm) | 600x438x88 [2U] | |||
| Net Weight (kgs) | 15 | ||||
| ENVIRONMENT | |||||
| Humidity | 20-90 % RH @ 0- 40°C (Non-condensing) | ||||
| Noise Level | Less than 55dB@1Meter | ||||
| MANAGEMENT | |||||
| Smart RS-232/USB | Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8/10, Linux, and MAC | ||||
| Optional SNMP | Power management from SNMP manager and web browser | ||||
FAQ